How to Set-up RAID Status Monitoring Tools After Self-Installing a Windows System

Copy page View as Markdown Open in ChatGPT Open in Claude Open in Perplexity

Typically Cherry Servers monitors the RAID status of your server and make sure that your disk drives are working seamlessly. However, if you decide to self-install an operating system through an out-of-band management console, or use an ESXi hypervisor, our systems will be unable to monitor the status. Monitoring will require manual setup by the client.

#Instructions to Set-up RAID Status Monitoring Tools After Self-Installing a Windows System

If you decide to self-install an operating system from a Microsoft Windows family, we recommend using the following links to download and set up RAID status monitoring and management tools with regard to your server plan:

E3-1240v3,
E3-1240Lv5,
E3-1240v5,
E5-1650v2,
E5-1650v3,
E5-1660v3,
E5-2670,
2x E5-2620v2,
2x E5-2620v4,
2x E5-2630v3
2x E5-2650v2,
2x E5-2650v4,
2x E5-2670v3,
2x E5-2680v4,
E5-1620v4,

Was this article helpful?

Thanks for the feedback!